如何正確選用煤礦井下電纜
正確選用煤礦井下電纜,對于煤礦**是很重要的,通常應遵循以下原則:
1.電纜敷設地點的水平差應與規定的電纜允許敷設水平差相適應。
2.電纜應帶有供保護接地用的足夠截面的導體。
3.嚴禁采用鋁包電纜。
4.必須選用取得煤礦礦用產品**標志的阻燃電纜。
5.電纜主線芯的截面應滿足供電線路負荷的要求。
6.對固定敷設的高壓電纜:
(1)在立井井筒或傾角為45°及其以上的井巷內,應采用聚氯乙烯絕緣粗鋼絲鎧裝聚氯乙烯護套電力電纜、交聯聚乙烯絕緣粗鋼絲
鎧裝聚氯乙烯護套電力電纜;
(2)在立井井筒或傾角為45°及其以下的井巷內,應采用聚氯乙烯絕緣鋼帶或細鋼絲鎧裝聚氯乙烯護套電力電纜、交聯聚乙烯鋼帶
或細鋼絲鎧裝聚氯乙烯護套電力電纜;
(3)在進風豎井、井底車場及其附近、中央變電所至采區變電所之間,可以采用鋁芯電纜;其他地點必須采用銅芯電纜。
7.固定敷設的低壓電纜,應采用MVV鎧裝或非鎧裝電纜或?qū)?yīng)電壓等級的移動橡套軟電纜。
8.非固定敷設的高低壓電纜,必須采用符合MT818標準的橡套軟電纜。移動式和手持式電氣設備應使用專用橡套電纜。
9.照明、通信、信號和控制用電纜,應采用鎧裝或非鎧裝通信電纜、橡套電纜或MVV型塑力纜。
10.低壓電纜不應采用鋁芯,采區低壓電纜嚴禁采用鋁芯。
如何正確選用煤礦井下電纜------服務專線 139 5254 1668
煤礦用聚(氯)乙烯絕緣和聚氯乙烯護套電話電纜 |
PVC insulated and PVC sheathed telephone cables for use in mines 產品用途:本產品適用于固定敷設在礦井作通信干線及分線箱與電話機連接線 Scope of application:This product is fit for being laid in fixed placed in mines for the connection of communication trunk lines and junction box and telephones. 執行標準 Standards implemented: Q/3210HL29-2003 |  | 型號、名稱及使用范圍 Model descriptions and Use scope 型 號 Model | 名 稱 Descriptions | 使 用 范 圍 Scope of application | MHVV(HUVV) | 煤礦用聚氯乙烯絕緣阻燃聚氯乙烯護套電話電纜 PVC insulated fire retardant PVC sheathed telephone cables for use in mines | 礦井中一般場合 General circumstances in mines | MHVVR(HUVVR) | 煤礦用聚氯乙烯絕緣阻燃聚氯乙烯護套軟電話電纜 PVC insulated fire retardant PVC sheathed soft telephone cables for use in mines | 礦井中分線盒、分線箱與電話機連接的場合 Where connection between junction box and telephone is required in mines | MHVV22(HUVV22) | 煤礦用聚氯乙烯絕緣鋼帶鎧裝阻燃聚氯乙烯護套電話電纜 PVC insulated steel tape armored fire retardant PVC sheathed telephone cables for use in mines | 礦井中承受一定沖擊力和壓力的場合 Where cables are under some impact and pressure in the mine | MHVV32(HUVV32) | 煤礦用聚氯乙烯絕緣細圓鋼絲鎧裝阻燃聚氯乙烯護套電話電纜 PVC insulated fine round steel wire armored fire retardant PVC sheathed telephone cables for use in mines | 礦井中垂直敷設或承受較大拉力的場合 Vertically laid or laid where the cables are under big impact and pull force in mines | MHYV(HUYV) | 煤礦用聚乙烯絕緣阻燃聚氯乙烯護套電話電纜 PE insulated fire retardant PVC sheathed telephone cables for use in mines | 礦井中一般場合 General circumstances in mines | MHYVR(HUYVR) | 煤礦用聚乙烯絕緣阻燃聚氯乙烯護套軟電話電纜 PE insulated fire retardant PVC sheathed soft telephone cables for use in mines | 礦井中一般場合 General circumstances in mines | MHYV22(HUYV22) | 煤礦用聚乙烯絕緣鋼帶鎧裝阻燃聚氯乙烯護套電話電纜 PE insulated steel tape armored fire retardant PVC sheathed telephone cables for use in mines | 礦井中承受一定沖擊力和壓力的場合 Where cables are under some impact and pressure in the mine | MHYV32(HUYV32) | 煤礦用聚乙烯絕緣細圓鋼絲鎧裝阻燃聚氯乙烯護套電話電纜 PE insulated fine round steel wire armored fire retardant PVC sheathed telephone cables for use in mines | 礦井中垂直敷設或承受較大拉力的場合 Vertically laid or laid where the cables are under big impact and pull force in mines | 電纜結構示意圖 IIIustration of cable structure 使用特性 Service characteristics 電纜長期允許工作溫度 Long-term service temperature of the cable conductor | -40℃-+50℃ | 電纜敷設溫度 Cable laying temperature | ≥-10℃ | +25℃時環境相對濕度 Environment relative humidity at 25℃ | ≤95% | 電纜的*小彎曲半徑 Minimun bending radius | MHVV MHYV MHVVR MHYVR 型電纜為電纜外徑的15倍,其它型號為外徑的20倍 15 times of the cable outer diameter of MHVV MHYV MHVVR MHYVR and 20times for the rest | 電纜規格 Specifications 型 號 Model | 規 格 Specifications | 導體結構(根數/直徑)mm Conductor structure(number/diameter) | MHYVR MHVVR | 1X2 | 1/0.28鍍錫銅線 +6/0.28鍍錫鋼線 1/0.28 tinned copper wire +6/0.28 tinned steel wire | MHVV22 MHVV32 MHYV22 MHYV32 | 2X2-100X2 | 1/0.5; 1/0.8 | MHVV MHYV | 1X2-100X2 | 1/0.5; 1/0.8 | 電纜主要技術性能 Major technical performances 1、 電纜導體直流電阻及固有衰減 DC resistance of the conductor and Intrinsic attenuation 型 號 Model | +20℃導體直流電阻(≤Ω/Km) DC resistance of conductor at 20℃ | 固有衰減(800Hz)≤db/Km Intrinsic attenuation | MHVVR MHYVR | 260 | 4.63 | MHVV22 MHVV32 MHYV22 MHYV32 MHVV MHYV | 95(0.5mm); 36.7(0.8mm) | 1.32(0.5mm); 0.95(0.8mm) | 2、電纜其它技術性能 Other major technical performances 序 號 Serial number | 項 目 Items | 型 號Model:MHVV MHVVR MHVV22 MHVV32 | 型 號Model:MHYV MHYVR MHYV22 MHYV32 | 1 | +20℃線芯導體直流電阻(Ω/Km) Line core DC resistance at 20℃ | 見上表 See above table | 2 | 電纜固有衰減(≤dm/Km) Cable intrinsic attenuation | 見上表 See above table | 3 | +20℃絕緣電阻(≥MΩ·Km) Insulating resistance at 20℃ | 110 ; 40(MHVVR) | 3000 ; 110(MHYVR) | 4 | 1min工頻交流電壓試驗 lmin power frequency alternating current pressure test | 芯-芯core - core 芯-鎧裝層core - armoring | 1000V不擊穿 1000V no breakdown | 1500V不擊穿 1500V no breakdown | 5 | 工作電容(≤μF/Km) Service capacity | 0.12 | 0.06 | 6 | 單根垂直燃燒試驗 Single wire burning test | MT386 | 7 | 成束燃燒試驗 Group burning test | 符合GB/T 18380.3標準中B類成束試驗要求 Conforms to GB/T18380.3 standard B types group test | |